Hornady Match Grade Neck Sizing Bushing .267″
The Hornady Match Grade Bushing .267″ is a precision-machined interchangeable neck-sizing bushing designed for use with Hornady Match Grade Bushing Dies. It allows reloaders to control neck tension by selecting the appropriate diameter based on the measured neck wall thickness of fired brass.
The .267″ inside diameter is selected to achieve a specific degree of neck tension tailored to the caliber and bullet combination. Hornady offers bushings in .001″ increments, enabling handloaders to adjust neck tension systematically during load development.
These bushings feature tight machined tolerances, which eliminate inconsistencies in neck resizing and help ensure uniform bullet seating across batches. Consistent neck tension results in more reliable and repeatable bullet performance.
| Specification | Value |
|---|---|
| Inside Diameter | .267″ |
| Increment | .001″ |
| Application | Hornady Match Grade Bushing Dies |
| Material | High-precision steel |
FAQ
What is the purpose of the .267″ neck sizing bushing?
The .267″ bushing is used to apply a specific degree of neck tension when resizing brass. It is selected based on the measured neck wall thickness to achieve consistent bullet seating and improved accuracy in handloaded ammunition.
How do I determine which bushing size to use?
Measure the neck wall thickness of your fired brass. Use that measurement to select the appropriate bushing diameter that provides the desired neck tension for your bullet and caliber combination.
Are these bushings compatible with other brands of dies?
No, these bushings are specifically designed for use with Hornady Match Grade Bushing Dies and are not compatible with other die systems.
Lily Rees –
I used this bushing during my load development for a .264 caliber. The consistency in neck tension made a noticeable difference in group size. The .001″ increments allowed me to fine-tune the tension step by step. Very reliable and precise.
Trevor Hardacre –
After switching to the .267″ bushing, my bullet seating became more consistent. The brass didn’t expand or compress unevenly, which improved my shot groupings. Great for match-grade reloading.
Emma Paige –
The bushing fits well with my Hornady die set. I measured my brass first and selected the right size. It’s a small part, but it made a big difference in my load uniformity.
Joe MacLeod –
I’ve used several bushing sizes and this one stands out for its precision. The tight tolerances ensure every round has the same neck tension. Works perfectly with my match loads.